1887
  1. Home
  2. A-Z Publications
  3. Geophysical Prospecting
  4. Volume 43, Issue 7
  5. Article
Volume 43 Number 7
  • E-ISSN: 1365-2478

Abstract

Abstract

A fast imaging technique is developed to deduce the spatial conductivity distribution in the earth from low‐frequency (> 1 MHz) cross‐well electromagnetic measurements. A sinusoidally oscillating, vertically orientated, magnetic dipole employed as a source, and it is assumed that the scattering bodies are azimuthally symmetric about the source dipole axis. The use of this model geometry reduces the 3D vector problem to a more manageable 2D scalar form. Additional efficiency is obtained by using the Born series approximation which is derived from nonlinear integral equations that account for the scattered magnetic fields generated by inhomogeneities embedded in a layered earth. Stabilization of the inversion problem is accomplished through the use of bounding constraints and a regularization method which results in a smooth model that fits the data to the desired noise level.

The applicability of cross‐well electromagnetics for imaging and monitoring changes caused by subsurface processes has been tested by simulating plumes of conductive fluid with 2D models. The images that result from inverting these synthetic data indicate that the vertical resolution of the method is better than the horizontal, increasing the noise decreases the image resolution, and incorporating knowledge in the form of positivity constraints improves the results. Although higher operating frequencies are usually associated with better resolution, frequencies as low as 100 Hz can produce acceptable images in simulated oilfield environments.

The imaging scheme has been applied to data collected during a salt‐water injection experiment at the Richmond Field Station test site in Richmond, California. Both the data and the resulting images clearly reveal the presence of the plume and indicate that it is migrating towards the north‐northwest rather than spreading symmetrically about the injection well. Applying the imaging code to synthetic data generated by a 3D sheet model verifies the interpretation of these results.

Loading

Article metrics loading...

/content/journals/10.1111/j.1365-2478.1995.tb00286.x
2006-04-28
2024-04-28

  • From This Site

    /content/journals/10.1111/j.1365-2478.1995.tb00286.x
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. AdenekanA.E. and PatzekT.W.1993. Cleaning up gasoline with steam; compositional simulations. Proceedings of the 12th SPE symposium on Reservoir Simulation, New Orleans, LA, Paper SPE 25257.
  2. AlumbaughD.L.1993. Iterative electromagnetic Born inversion applied to earth conductivity. imaging. Lawrence Berkeley Laboratory Report LBL‐34553.
  3. AlumbaughD.L. and MorrisonH.F.1993. Elecromagnetic conductivity imaging with an iterative Born inversion. IEEE Transactions on Geoscience and Remote Sensing31758–763.
    [Google Scholar]
  4. ArchieG.E.1942. The electrical resistivity log as an aid in determining some reservoir characteristics. AIME Transactions146, 54–62.
    [Google Scholar]
  5. AugustinA.M., KennedyW.D., MorrisonH.F. and LeeK.H.1989. A theoretical study of surface‐to‐borehole electromagnetic logging in cased holes. Geophysics54, 90–99.
    [Google Scholar]
  6. BarthesV.
    and VasseurG. 1978. An inverse problem for electromagnetic prospecting. In: Applied Inverse Problems, Lecture Notes in Physics85, (ed. P.C.Sabatier ), pp. 325–329.
    [Google Scholar]
  7. BevcD. and MorrisonH.F.1992. Borehole‐to‐surface electrical conductivity monitoring of a salt water injection experiment. Geophysics56, 769–777.
    [Google Scholar]
  8. ConstableS.C., ParkerR.L. and ConstableC.G.1987. Occam's inversion; a practical algorithm for generating smooth models from electromagnetic sounding data. Geophysics52, 289–300.
    [Google Scholar]
  9. DailyW.1984. Underground oilshale retort monitoring using geotomography. Geophysics49, 1701–1707.
    [Google Scholar]
  10. DavisD.T., LytleR.J. and LaineE.F.1979. Use of high frequency electromagnetic waves for mapping an in situ coal gassification burn front. In Situ3, 95–119.
    [Google Scholar]
  11. Deszcz‐PanM.1994. The crosswell electrotnagnetic response of layered media. Pb.D. thesis, University of California at Berkeley.
  12. DevaneyA.J.1934. Geophysical diffraction tomography. IEEE Transactions on Geoscience and Rennte Sensing22, 3–13.
    [Google Scholar]
  13. GillP.E., MurrayV. and WrightM.H.1981. Practical Optimization.Academic Press, Inc.
    [Google Scholar]
  14. HansonJ.C., TweetonD.R., FriedelM.J. and DahlL.J.1991. A field test of electromagnetic methods for the detection of conductive plumes. 61st SEG meeting, Houston, Expanded Abstracts, 569–572.
  15. HohmannG.W. and RaicheA.P.1988. Inversion of controlled‐source electromagnetic data. In: Electromagnetic Methods in Applied Geophysics, Vol. 1, Theory (ed. M.N.Nabighian ), pp. 469–503. Society of Exploration Geophysicists.
    [Google Scholar]
  16. HopperM.J.1979. HARTWELL Subroutine Library ‐ A Catalogue of Subroutines. AERE, Harwell, Didcot, Oxon, OX11 ORA, England.
  17. JusticeJ.H., VassiliouA.A., SinghS., LogelJ.D., HansenP.A., HallB.R., HuttP.R. and SolankiJ.J.1989. Acoustic tomography for monitoring enhanced oil recovery. The Leading Edge8(2), 12–19.
    [Google Scholar]
  18. KellerG.V.1988. Rock and mineral properties. In: Electromagnetic Methods in Applied Geophysics, Vol. I, Theory (ed. M.N.Nabighian ), pp. 13–52. Society of Exploration Geophysicists.
    [Google Scholar]
  19. KongJ.A.1975. Theory of Elecnomagnetic Waves.John Wiley & Sons, Inc.
    [Google Scholar]
  20. LaineE.F.1987. Remote monitoring of the steam‐flood enhanced oil recovery process. Geophysics52, 1457–1465.
    [Google Scholar]
  21. LawsonC.L. and HansonR.J.1974. Solving Least‐Squares Problems.Prentice‐Hall, Inc. Chap. 23.
    [Google Scholar]
  22. MansureA.J. and MeldauR.F.1990. Steam‐zone electrical characteristics for geodiagnostic evaluation of steamflood performance. SPE Formations Evaluation5, 241–247.
    [Google Scholar]
  23. NewmanG.A.1992. Three‐dimensional electromagnetic inversion of insufficient and inadequate data. 62nd SEG meeting, New Orleans, Expanded Abstracts, 453–456.
  24. ParkS.K. and Van ParkG.P.1991. Inversion of pole‐pole data for for 3‐D resistivity structure beneath arrays of electrodes. Geophysics56, 951–960.
    [Google Scholar]
  25. SenaA.G. and ToksozM.1990. Simultaneous reconstruction of permittivity and conductivity for cross hole geometries. Geophysics55, 1302–1311.
    [Google Scholar]
  26. SpiesB.R.1992. Survey design considerations for cross‐well electromagnetics. 62nd SEG meeting, New Orleans, Expanded Abstracts, 498–501.
  27. StarkP.B.1987. Strict bounds and applications. Proceedings of RCP 264 Recontre Interdisciplinaire Problems Inverses Montpellier, France.
  28. StoyerC.H.1977. Electromagnetic fields of dipoles in stratified media. IEEE Transactions on Antennae and Propagation25, 547–552.
    [Google Scholar]
  29. TikhonovA.N. and ArseninV.Y.1977. Solutions of Ill‐Posed Problems.John Wiley & Sons, Inc.
    [Google Scholar]
  30. Torres‐VerdinC. and HabashyT.M.1994. Rapid 2.5‐D forward modeling and inversion via a new nonlinear scattering approximation. Radio ScienceVol 29, 1051–1079.
    [Google Scholar]
  31. UchidaT., LeeK.H. and WiltM.J.1991. Effect of a steel casing on crosshole EM measurements. 61st SEG meeting, Houston, Expanded Abstracts, 442–445.
  32. van Poolen H. K. and Associates
    van Poolen H. K. and Associates . 1981. Fundamentals of Enhanced Oil Recovery.Penn Well Books.
    [Google Scholar]
  33. WaitJ.R. and HillD.A.1980. Fields of a horizontal loop of arbitrary shape buried in a two‐layer earth. Radio Science15, 903–912.
    [Google Scholar]
  34. WaxmanM.H. and SmitsE.C.1968. Electrical conductivities in oil‐bearing shaley sands. SPEJ Transactions AIME243, 107–122.
    [Google Scholar]
  35. WeideltP.1981. Dipole induction on a thin plate with host medium and overburden. Research project NTS 83, No. 89727, Federal Institute of Earth Sciences and Raw Materials, Hannover, West Germany.
  36. WiltM.J., AlumbaughD.L., MorrisonH.F., BeckerA., LeeK.H. and Deszcz‐PanM.1995. Crosshole electromagnetic tomography: design considerations and field results. Geophysics60, 871–885.
    [Google Scholar]
  37. WiltM.J., MorrisonH.F., BeckerA. and LeeK.H.1991. Cross‐borehole electromagnetic induction for reservoir characterization. 61st SEG meeting, Houston, Expanded Abstracts 456–459.
  38. WiltM.J. and SchenkelC.1992. Cross‐borehole electromagnetic induction for steam flooding monitoring. 62nd meeting, New Orleans, Expanded Abstracts, 484–487.
  39. WorthingtonM.H.1984. An intoduction to geophysical tomography. First Break2(11), 20–26.
    [Google Scholar]
  40. WuX. and HabashyT.M.1994. Influence of steel casings on electromagnetic signals. Geophysics59, 378–390.
    [Google Scholar]
  41. WuR.S. and ToksozM.N.1987. Diffraction tomography and multisource holography applied to seismic imaging. Geophysics52, 11–25.
    [Google Scholar]
  42. ZhouQ.1989. Audio‐frequency electromagnetic tomography for reservoir evaluation. Lawrence Berkeley Laboratory Report LBL‐28171.
  43. ZhouQ., BeckerA. and MorrisonH.F.1993. Audio‐frequency electromagnetic tomography in 2‐D. Geophysics58, 482–495.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/journals/10.1111/j.1365-2478.1995.tb00286.x
Loading
  • Article Type: Research Article

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error