1887
  1. Home
  2. A-Z Publications
  3. Basin Research
  4. Volume 19, Issue 1
  5. Article
Volume 19, Issue 1
  • E-ISSN: 1365-2117

Abstract

ABSTRACT

Scaled sandbox models simulated primary controls on the kinematics of the early structural evolution of salt‐detached, gravity‐driven thrust belts on passive margins. Models had a neutral‐density, brittle overburden overlying a viscous décollement layer. Deformation created linked extension–translation–shortening systems. The location of initial brittle failure of the overburden was sensitive to perturbations at the base of the salt. Salt pinch‐out determined the seaward limit of the thrust belt. The thrust belts were dominated by pop‐up structures or detachment folds cut by break thrusts. Pop‐ups were separated by flat‐bottomed synclines that were partially overthrust. Above a uniformly dipping basement, thrusts initiated at the salt pinch‐out then consistently broke landward. In contrast, thrust belts above a seaward‐flattening hinged basement nucleated above the hinge and then spread both seaward and landward. The seaward‐dipping taper of these thrust belts was much lower than typical, frictional, Coulomb‐wedge models. Towards the salt pinch‐out, frictional resistance increased, thrusts verged strongly seawards and the dip of the taper reversed as the leading thrust overrode this pinch‐out. We attribute the geometry of these thrust belts to several causes. (1) Low friction of the basal décollement favours near‐symmetric pop‐ups. (2) Mobile salt migrates away from local loads created by overthrusting, which reduces the seaward taper of the thrust belt. (3) In this gravity‐driven system, shortening quickly spreads to form wide thrust belts, in which most of the strain overlapped in time.

Loading

Article metrics loading...

/content/journals/10.1111/j.1365-2117.2007.00317.x
2007-03-09
2024-04-24

  • From This Site

    /content/journals/10.1111/j.1365-2117.2007.00317.x
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. Bahroudi, A. & Koyi, H.A. (2003) Effect of spatial distribution of Hormuz salt on deformation style in the Zagros fold and thrust belt: an analogue modelling approach. Journal of the Geological Society, London, 160, 719–733.
    [Google Scholar]
  2. Baldwin, B. & Butler, C.O. (1985) Compaction curves. AAPG Bull., 69, 622–626.
    [Google Scholar]
  3. Beaumont, C., Fullsack, P. & Hamilton, J.H. (1992) Erosional control of active compressional orogens. In: Thrust Tectonics (Ed. by K.R.McClay ), pp. 377–390. Chapman and Hall, London.
    [Google Scholar]
  4. Bilotti, F. & Shaw, J. (2005) Deep‐water Niger Delta fold and thrust belt modeled as a critical‐taper wedge: the influence of elevated basal fluid pressure on structural styles. AAPG Bull., 89, 1475–1491.
    [Google Scholar]
  5. Brun, J.P. & Fort, X. (2004) Compressional salt tectonics (Angolan Margin). Tectonophysics, 382, 129–150.
    [Google Scholar]
  6. Cobbold, P.R., SzatmarI, P., Demercian, L.S., Coelho, D. & Rossello, E.A. (1995) Seismic and experimental evidence for thin skinned horizontal shortening by convergent radial gliding on evaporites, deep‐water Santos Basin, Brazil. In: Salt Tectonics: A Global Perspective (Ed. by M.P.A.Jackson , D.G.Roberts & S.Snelson ), AAPG Mem.65, 305–321.
    [Google Scholar]
  7. Costa, E. & Vendeville, B.C. (2002) Experimental insights on the geometry and kinematics of fold‐and‐thrust belts above weak, viscous evaporitic décollement. J. Struct. Geol., 24, 1729–1739.
    [Google Scholar]
  8. Cotton, J. & Koyi, H.A. (2000) Modelling of thrust fronts above ductile and frictional décollements; examples from The Salt Range and Potwar Plateau, Pakistan. GSA Bull., 112, 351–363.
    [Google Scholar]
  9. Dahlen, F.A. (1983) The influence of basal cohesion and plasticity on the profiles of fold‐and‐thrust belts and accretionary wedges. Eos Trans. Am. Geophys. Union, 64 (18), 318.
    [Google Scholar]
  10. Dahlen, F.A., Suppe, J. & Davis, D.M. (1984) Mechanics of fold and‐thrust belts and accretionary wedges (continued). Cohesive coulomb theory. J. Geophys. Res., 89, 10087–10101.
    [Google Scholar]
  11. Davis, D. & Engelder, T. (1985) The role of salt in fold/thrust belts. Tectonophysics, 119, 67–88.
    [Google Scholar]
  12. Davis, D., Suppe, J. & Dahlen, F.A. (1983) Mechanics of fold/thrust belts and accretionary wedges. J. Geophys. Res., 88, 1153–1172.
    [Google Scholar]
  13. Fort, X., Brun, J.P. & Chauvel, F. (2004) Salt tectonics on the Angolan margin, synsedimentary deformation processes. AAPG Bull., 88, 1523–1544.
    [Google Scholar]
  14. Gottschalk, R.R., Anderson, A.V., Walker, J.D. & Da Xilva, J.C. (2004) Modes of contractional salt tectonics in Angola Block 33, Lower Congo basin, West Africa. In: Salt‐Sediment Interactions and Hydrocarbon Prospectivity: Concepts, Applications, and Case Studies for the 21st Century (Ed. by P.J.Post , D.L.Olson , K.T.Lyons , S.L.Palmes , P.F.Harrison & N.C.Rosen ), 24th Annual Research Conference, SEPM Foundation, 705–734.
    [Google Scholar]
  15. Hardy, S., Duncan, C., Masek, J. & Brown, D. (1998) Minimum work, fault activity and the growth of critical wedges in fold and thrust belts. Basin Res., 10, 365–373.
    [Google Scholar]
  16. Harrison, C.J. (1995) Tectonics and kinematics of a foreland folded belt influenced by salt, Arctic Canada. In: Salt Tectonics: A Global Perspective (Ed. by M.P.A.Jackson , D.G.Roberts & S.Snelson ), AAPG Mem., 65, 379–412.
    [Google Scholar]
  17. Hudec, M.R. & Jackson, M.P.A. (2002) Structural segmentation, inversion, and salt tectonics on a passive margin: evolution of the Inner Kwanza Basin, Angola. Geol. Soc. Am. Bull., 114, 1222–1244.
    [Google Scholar]
  18. Hudec, M.R. & Jackson, M.P.A. (2007) Terra infirma: Understanding salt tectonics. Earth Science Reviews, doi: DOI: 10.1016/j.earscirev.2007.01.001.
  19. Jackson, M.P.A., Cramez, C. & Fonck, J.‐M. (2000) Role of subaerial volcanic rocks and mantle plumes in creation of South Atlantic margins: implications for salt tectonics and source rocks. Mar. Petrol. Geol., 17, 477–498.
    [Google Scholar]
  20. Jackson, M.P.A. & Hudec, M.R. (2005) Stratigraphic record of translation down ramps in a passive‐margin salt detachment. J. Struct. Geol., 27, 889–911.
    [Google Scholar]
  21. Jackson, M.P.A., Hudec, M.R. & Hegarty, K.A. (2005) The great West African Tertiary coastal uplift: fact or fiction? A perspective from the Angolan divergent margin. Tectonics, 24, TC6014, doi:DOI: 10.1029/2005TC001836.
    [Google Scholar]
  22. Jackson, M.P.A., Hudec, M.R. & Jennette, D.C. (2004) Insights from a gravity‐driven linked system in deep‐water lower Congo Basin, Gabon. In: Salt‐Sediment Interactions and Hydrocarbon Prospectivity: Concepts, Applications, and Case Studies for the 21st Century (Ed. by P.J.Post , D.L.Olson , K.T.Lyons , S.L.Palmes , P.F.Harrison & N.C.Rosen ), 24th Annual Research Conference, SEPM Foundation, 735–752.
    [Google Scholar]
  23. Koyi, H. (1997) Analogue modelling: from a qualitative to a quantitative technique-a historical perspective. J. Petrol. Geol., 20, 223–238.
    [Google Scholar]
  24. Koyi, H.A. & Vendeville, B.C. (2003) The effect of décollement dip on geometry and kinematics of model accretionary wedges. J. Struct. Geol., 25, 1445–1450.
    [Google Scholar]
  25. Krantz, R.W. (1991) Normal fault geometry and fault reactivation in tectonic inversion experiments. In: The geometry of normal faults (Ed. by A.M.Roberts , G.Yielding & B.Freeman ), Geo. Soc. Lond. Spec. Publ., 56, 219–229.
    [Google Scholar]
  26. Laubscher, H.P. (1977) Fold development in the Jura. Tectonophysics, 37, 337–362.
    [Google Scholar]
  27. Letouzey, J., Colletta, B., Vially, R. & Chermette, J.C. (1995) Evolution of salt‐related structures in compressional settings. In: Salt Tectonics: A Global Perspective (Ed. by M.P.A.Jackson , D.G.Roberts & S.Snelson ), AAPG Mem. , 65, 41–60.
    [Google Scholar]
  28. Liu, H., McClay, K.R & Powell, D. (1992) Physical models of thrust wedges. In: Thrust Tectonics (Ed. by K.R.McClay ), pp. 71–81. Chapman and Hall, London.
    [Google Scholar]
  29. Lohrmann, J., Kukowski, N., Adam, J. & Oncken, O. (2003) The impact of analogue material properties on the geometry, kinematics, and dynamics of convergent sand wedges. J. Struct. Geol., 25, 1691–1711.
    [Google Scholar]
  30. Marton, L.G., Tari, G.C. & Lehmann, C.T. (2000) Evolution of the Angolan passive margin, West Africa, with emphasis on post‐salt structural styles. In: Atlantic Rifts and Continental Margins (Ed. by W.Mohriak & M.Talwani ), Am. Geophys. Union Geophys. Monogr. , 115, 129–149.
    [Google Scholar]
  31. McClay, K.R. (1990) Deformation mechanics in analogue models of extensional fault systems. In: Deformation mechanisms, rheology and tectonics (Ed. by R.J.Knipe & E.H.Rutter ), Geol. Soc. Lond. Spec. Publ . 54, 445–453.
    [Google Scholar]
  32. McClay, K.R., Dooley, T. & Lewis, G. (1998) Analog modeling of progradational delta systems. Geology, 26, 771–774.
    [Google Scholar]
  33. McClay, K.R., Dooley, T. & Zamora, G. (2003) Analogue models of delta systems above mobile shales. In: Subsurface Sediment Mobilization (Ed. by P.Van Rensbergen , C.Morley , R.Hillis & J.Cartwright ), Geol. Soc. Lond. Spec.Publ., 216, 411–428.
    [Google Scholar]
  34. McClay, K.R., Whitehouse, P.S., Dooley, T. & Richards, M. (2004) 3D evolution of fold and thrust belts formed by oblique convergence. Mar. Petrol. Geol., 21, 857–877.
    [Google Scholar]
  35. Mulugeta, G. (1988) Modeling the geometry of Coulomb thrust wedges. J. Struct. Geol., 10, 847–859.
    [Google Scholar]
  36. Mulugeta, G. & Koyi, H. (1987) Three‐dimensional geometry and kinematics of experimental piggyback thrusting. Geology, 15, 1052–1056.
    [Google Scholar]
  37. Nelson, T.H. & Fairchild, L. (1989) Emplacement and evolution of salt sills in the Northern Gulf of Mexico (abs). Houston Geol. Soc. Bull., 32, 6–7.
    [Google Scholar]
  38. Peel, F.J., Travis, C.J. & Hossack, J.R. (1995) Genetic structural provinces and salt tectonics of the Cenozoic offshore U. S. Gulf of Mexico: a preliminary analysis. In: Salt Tectonics: A Global Perspective (Ed. by M.P.A.Jackson , D.G.Roberts & S.Snelson ), AAPG Mem. , 65, 153–175.
    [Google Scholar]
  39. Ramberg, H. (1981) The role of gravity in orogenic belts. In: Thrust and Nappe Tectonics (Ed. by K.R.McClay & N.J.Prices ), Geol. Soc. Lond. Spec. Publ. , 9, 125–140.
    [Google Scholar]
  40. Rossi, D. & Storti, F. (2003) New artificial granular materials for analogue laboratory experiments: aluminium and siliceous microspheres. J. Struct. Geol., 25, 1893–1899.
    [Google Scholar]
  41. Rouby, D., Guillocheau, N.F., Robin, N.C., Bouroullec, W.R., Raillard, Z.S., Castelltort, S. & Nalpas, T. (2003) Rates of deformation of an extensional growth fault/raft system (offshore Congo, West African margin) from combined accommodation measurements and 3‐D restoration. Basin Res., 15, 183–200.
    [Google Scholar]
  42. Rowan, M.G. (1993) A systematic technique for the sequential restoration of salt structures. Tectonophysics, 228, 331–348.
    [Google Scholar]
  43. Rowan, M.G., Peel, F.J. & Vendeville, B.C. (2004) Gravity‐driven thrust belts on passive margins. In: Thrust Tectonics and Hydrocarbon Systems (Ed. by K.R.McClay ), AAPG Mem. , 82, 157–182.
    [Google Scholar]
  44. Rowan, M.G., Trudgill, B.D. & Fiduk, J.C. (2000) Deep‐water, salt‐cored foldbelts: lessons from the Mississippi Fan and Perdido foldbelts, Northern Gulf of Mexico. In: Atlantic Rifts and Continental Margins (Ed. by W.Mohriak & M.Talwani ), Am. Geophys. Union Geophys. Monogr. , 115, 173–191.
    [Google Scholar]
  45. Sans, M. & Vergés, J. (1995) Fold development related to contractional salt tectonics: southeastern Pyrenean thrust front, Spain. In: Salt Tectonics: A Global Perspective (Ed. By M.P.A.Jackson , D.G.Roberts & S.Snelson ), AAPG Memoir , 65, 369–378.
    [Google Scholar]
  46. Schellart, W.P. (2000) Shear test results for cohesion and friction coefficients for different granular materials: scaling implications for their usage in analogue modeling. Tectonophysics, 324, 1–16.
    [Google Scholar]
  47. Sepehr, M. & Cosgrove, J.W. (2004) Structural framework of the Zagros Fold – Thrust Belt, Iran. Mar. Petrol. Geol., 21, 829–843.
    [Google Scholar]
  48. Storti, F. & McClay, K.R. (1995) Influence of syntectonic sedimentation on thrust wedges in analog models. Geology, 23, 999–1002.
    [Google Scholar]
  49. Trudgill, B.D., Rowan, M.G., Fiduk, J.C., Weimer, P., Gale, P.E., Korn, B.E., Phair, R.L., Gafford, W.T., Roberts, G.R. & Dobbs, S.W. (1999) The Perdido Fold Belt, Northwestern Deep Gulf of Mexico, part 1: structural geometry, evolution and regional implications. Am. Assoc. Petrol. Geol. Bull., 83, 88–113.
    [Google Scholar]
  50. Vendeville, B.C., Cobold, P.R., Davy, P., Brun, J.P. & Choukrone, P. (1987) Physical models of extensional tectonics at various scales. In: Continental Extensional Tectonics (Ed. by M.P.Coward , J.F.Dewey & P.L.Hancock ), Geol. Soc. Lond. Spec. Publ., 28, 95–107.
    [Google Scholar]
  51. Waltham, D. (1997) Why does salt start to move?Tectonophysics, 282, 117–128.
    [Google Scholar]
  52. Weijermars, R., Jackson, M.P.A. & Vendeville, B.C. (1993) Rheological and tectonic modeling of salt provinces. Tectonophysics, 217, 143–174.
    [Google Scholar]
  53. Weijermers, R. (1986) Flow behavior and physical chemistry of bouncing putties and related polymers in view of tectonic laboratory applications. Tectonophysics, 124, 325–358.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/journals/10.1111/j.1365-2117.2007.00317.x
Loading
Initiation and growth of salt‐based thrust belts on passive margins: results from physical models
Basin Research 19, 165 (2007); https://doi.org/10.1111/j.1365-2117.2007.00317.x
/content/journals/10.1111/j.1365-2117.2007.00317.x
/content/journals/10.1111/j.1365-2117.2007.00317.x
Loading

Data & Media loading...

  • Article Type: Research Article

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error