1887
Volume 3 Number 4
  • E-ISSN: 1365-2117

Abstract

Abstract

The flexural rigidity of the oceanic lithosphere is strongly dependent on its temperature structure at the time of loading. It is commonly assumed that the depth to the 450°C isotherm defines the effective elastic thickness of the lithosphere. However, recent gravity studies across the Baltimore Canyon and Nova Scotian margins suggest that temperature may play a more complicated role in controlling the mechanical strength of extended continental lithosphere. For example, the flexural strength of the Baltimore Canyon margin (with sediment thicknesses of ≅ 15 km) appears to be controlled by the depth to the 150°C isotherm whereas the strength of the Nova Scotian margin (with sediment thicknesses cf ≅ 10 km) is controlled by the depth to the 250°C isotherm. The apparent correlation between sediment thickness and controlling isotherm suggests that sediment blanketing may play a role in modifying the flexural strength of extended continental lithosphere. This hypothesis was investigated by simulating the sedimentation history of a margin as a Gaussian function in which sedimentation peak and rate are determined by the mean and standard deviation of the function. The temperature structure of the lithosphere is continually modified as sediments are deposited on, and incorporated into the temperature structure of, the underlying lithosphere. Given a ‘starting’ value of defined by the degree of extension of the lithosphere, the modification of appears to be directly proportional to the sedimentation rate and cumulative sediment thickness, and inversely proportional to the time at which the sedimentation rate is a maximum. The first‐order consequence of sediment blanketing is to reduce the cooling rate of the lithosphere relative to cooling in the absence of sediments. At thermal equilibrium, the initial value of is reduced by the cumulative sediment thickness. Local isostatic conditions (i. e. ≅ 0) can only be approached when the sedimentation rate is unrealistically high (> 1000 m/Myr) during the rift or early post‐rift phase of basin development. However, while these early loads may be locally compensated, any subsequent loads will be regionally compensated. Thus, it is unlikely that the low present‐day flexural strengths interpreted from the Baltimore Canyon and Nova Scotian passive continental margins are a consequence of sediment blanketing.

Loading

Article metrics loading...

/content/journals/10.1111/j.1365-2117.1991.tb00127.x
2007-11-06
2024-03-28
Loading full text...

Full text loading...

References

  1. BARTON, P. & WOOD, R. (1984) Tectonic evolution of the North Sea basin: crustal stretching and subsidence. Geophys. J. R. astr. Soc.79, 987–1022.
    [Google Scholar]
  2. BEAUMONT, C. (1979) On the rheological zonation of the lithosphere during flexure. Tectonophys.59, 347–366.
    [Google Scholar]
  3. BEAUMONT, C., KEEN, C. E. & BOUTILIER, R. (1982) On the evolution of rifted continental margins: Comparison of models and observations for the Nova Scotian margin. Geophys. J. R. astr. Soc.70, 667–715.
    [Google Scholar]
  4. BULLARD, E. C. (1936) Gravity measurements in East Africa. Phil. Trans. R. Soc. A235, 445–531.
    [Google Scholar]
  5. COWIE, P. A. & KARNER, G. D. (1990) Gravity effect of sediment compaction: Examples from the North Sea and the Rhine Graben. Earth Planet. Sci. Letts99, 141–153.
    [Google Scholar]
  6. DE BREMAECKER, J‐C. (1983) Temperature, subsidence, and hydrocarbon maturation in extensional basins: A finite element model. Bull. Am. Ass. Petrol. Geol.67, 1410–1414.
    [Google Scholar]
  7. EBINGER, C. J., KARNER, G. D. & WEISSEL, J. K. (1991) Mechanical strength of extended continental lithosphere: Constraints from the Western rift system, East Africa. Tectonics1239–1256.
    [Google Scholar]
  8. FOWLER, S. & MCKENZIE, D. P. (1989) Gravity studies of the Rockall and Exmouth Plateaux using SEASAT altimetry. Basin Res.2, 27–34.
    [Google Scholar]
  9. HELLINGER, S. J. & SCLATER, J. G. (1983) Some remarks on two‐layer extensional models for the evolution of sedimentary basins. J. geophys. Res.88, 8251–8269.
    [Google Scholar]
  10. HOUSEMAN, G. A. & HEGARTY, K. A. (1987) Did rifting on Australia's southern margin result from tectonic uplift?Tectonics6, 515–527.
    [Google Scholar]
  11. KARNER, G. D. & WATTS, A. B. (1982) On isostasy at Atlantic‐type continental margins. J. geophys. Res.87, 2923–2948.
    [Google Scholar]
  12. KARNER, G. D., DRISCOLL, N. W. & PEIRCE, J. (1991) Gravity and magnetic signature of Broken Ridge. Proc. ODP Sci. Results121, 681–695.
    [Google Scholar]
  13. KOMINZ, M. A. & BOND, G. C. (1986) Geophysical modelling of the thermal history of foreland basins. Nature320, 252–256.
    [Google Scholar]
  14. LASE STUDY GROUP
    LASE STUDY GROUP (1986) Deep structure of the U. S. east coast passive margin from large aperture seismic experiments. Mar. Petrol. Geol.3, 234–242.
    [Google Scholar]
  15. MCKENZIE, D. P. (1978) Some remarks on the development of sedimentary basins. Earth Planet. Sci. Letts40, 25–32.
    [Google Scholar]
  16. NUNN, J. A., SCARDINA, A. D. & PILGERJR., R. H. (1984) Thermal evolution of the north‐central Gulf Coast. Tectonics3, 723–740.
    [Google Scholar]
  17. PARSONS, B. & SCLATER, J. G. (1977) An analysis of the variation of ocean floor heat flow and bathymetry with age. J. geophys. Res.82, 803–827.
    [Google Scholar]
  18. ROYDEN, L. & KEEN, C. E. (1980) Rifting processes and thermal evolution of the continental margin of eastern Canada determined from subsidence curves. Earth Planet. Sci. Letts51, 343–361.
    [Google Scholar]
  19. SAWYER, D. S., TOKSOZ, M. N., SCLATER, J. G. & SWIFT, B. A. (1982) Thermal evolution of the Baltimore Canyon Trough and Georges Bank basin. In: Studies in Continental Margin Geology (Ed. by J. S. Watkins & C. L. Drake). Mem. Am. Ass. Petrol. Geol. 34, 743–764.
  20. SCHLISCHE, R. W. & OLSEN, P. E. (1990) Structural development of the Newark basin. J. Geol.98, 135–156.
    [Google Scholar]
  21. STECKLER, M. S. & WATTS, A. B. (1978) Subsidence of the Atlantic‐type continental margin off New York. Earth Planet. Sci. Letts41, 1–13.
    [Google Scholar]
  22. STEPHENSON, R. (1989) Beyond first‐order thermal subsidence models for sedimentary basins? In: Quantitative Dynamic Stratigraphy (Ed. by T. A.Cross ), pp. 113–125. Prentice‐Hall , NJ .
    [Google Scholar]
  23. STEPHENSON, R. A., NAKIBOGLU, S. M. & KELLY, M. A. (1989) Effects of asthenospheric melting, regional thermoisostasy, and sediment loading on the thermomechanical subsidence of extensional sedimentary basins. In: Origin and Evolution of Sedimentary Basins and their Energy and Mineral Resources (Ed. by R. A. Price). Geophys. Monogr. 48, 17–28.
  24. UNGERER, P., BURRUS, J., DOLIGEZ, B.CHÉNET, P. Y. & BESSIS, F. (1990) Basin evaluation by integrated two‐dimensional modeling of heat transfer, fluid flow, hydrocarbon generation, and migration. Bull. Am. Ass. Petrol. Geol.74, 309–335.
    [Google Scholar]
  25. USSAMI, N., KARNER, G. D. & BOTT, M. H. P. (1986) Crustal detachment during south Atlantic rifting and formation of the Tucano‐Gabon basin system. Nature322, 629–632.
    [Google Scholar]
  26. WATTS, A. B. (1978). An analysis of isostasy in the world's oceans: 1. Hawaiian–Emperor seamount chain. J. geophys. Res.83, 5989–6004.
    [Google Scholar]
  27. WATTS, A. B., KARNER, G. D. & STECKLER, M. S. (1982) Lithospheric flexure and the evolution of sedimentary basins. In: The Evolution of Sedimentary Basins (Ed. by P. Kent, M. H. P. Bott, D. P. McKenzie & C. A. Williams). Phil. Trans. R. Soc. A, 305, 249–281.
  28. WATTS, A. B. (1988) Gravity anomalies, crustal structure and flexure of the lithosphere at the Baltimore Canyon Trough. Earth Planet. Sci. Letts89, 221–238.
    [Google Scholar]
  29. WEISSEL, J. K. & KARNER, G. D. (1989) Flexural uplift of rift flanks due to mechanical unloading of the lithosphere during extension. J. geophys. Res.94, 13,919–13,950.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/journals/10.1111/j.1365-2117.1991.tb00127.x
Loading
  • Article Type: Research Article

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error