1887
Volume 23, Issue 1
  • ISSN: 1354-0793
  • E-ISSN:

Abstract

Direct shear experiments were undertaken to investigate the effect of faulting and reactivation on the hydromechanical characteristics of faults in continental carbonate samples. The tested rock is a travertine of continental, microbial origin with a calcite content of 99 wt%, with a strongly laminated texture. Analyses of the intact and sheared samples performed using medical X-ray computed tomography (CT) revealed that the porosity is mainly composed of subplanar pores and vugs. Permeability is high along the laminations, controlled by interconnected pores and fractures. The travertine is a lithological analogue for Aptian pre-salt oil reservoir rocks found in South Atlantic offshore basins. Three samples, with dimensions of 240 × 110 × 150 mm, were sheared to a maximum displacement of 120 mm under different levels of effective vertical stress (6–45 MPa), resulting in the formation of cataclastic fault gouge surrounded by a dense fracture network. A new experimental method was used to reactivate the artificially formed fault by performing cyclic vertical loading at different shear displacements on a previously sheared sample, while keeping a constant pore-pressure differential throughout the test.

Pore-fluid responses across the fault zone were monitored continuously during both deformation (dynamic transmissibility) and hold periods (static transmissibility). Results show that the transmissibility reduces in all the samples for all values of the applied effective vertical stress and during shear reversal. The static transmissibility also decreases over time, which may be a result of creep deformation or the blocking of pore channels with gouge material. Our results indicate that once the gouge material is developed in the core of a carbonate fault zone, the dynamic transmissibility across that fault is permanently decreased, with little dependence on subsequent kinematics of reactivation, or changes in stress, so long as the gouge zone is not breached by a new structure.

Loading

Article metrics loading...

/content/journals/10.1144/petgeo2016-025
2016-08-31
2024-03-28
Loading full text...

Full text loading...

References

  1. Akin, M., Ozsan, A. & Akin, M.
    2009. Investigation of the macro pore geometry of yellow travertines using the shape parameter approach. Environmental & Engineering Geoscience, 15, 197–209.
    [Google Scholar]
  2. Auradou, H., Drazer, G., Hulin, J.P. & Koplik, J.
    2005. Permeability anisotropy induced by the shear displacement of rough fracture walls. Water Resources Research, 41, W09423.
    [Google Scholar]
  3. Auradou, H., Drazer, G., Boschan, D., Hulin, J.P. & Koplik, J.
    2006. Flow channelling in a single fracture induced by shear displacement. Geothermics, 35, 576–588.
    [Google Scholar]
  4. Bastesen, E., Braathen, A. & Skar, T.
    2013. Comparison of scaling relationships of extensional fault cores in tight carbonate and porous sandstone reservoirs. Petroleum Geoscience, 19, 385–398, http://doi.org/10.1144/petgeo2011-020
    [Google Scholar]
  5. Bense, V.F., Gleesonb, T., Loveless, S.E., Bour, O. & Scibek, J.
    2013. Fault zone hydrogeology. Earth-Science Reviews, 127, 171–192.
    [Google Scholar]
  6. Bruno, M.S.
    1992. Subsidence-induced well failure. SPE Drilling Engineering, 7, 148–152.
    [Google Scholar]
  7. Byerlee, J. & Summers, R.
    1976. A note on the effect of fault gouge thickness on fault stability. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 13, 35–36.
    [Google Scholar]
  8. Byerlee, J., Mjachkin, V., Summers, R. & Voevoda, O.
    1978. Structures developed in fault gouge during stable sliding and stick-slip. Tectonophysics, 44, 161–171.
    [Google Scholar]
  9. Caine, J.S., Evans, J.P. & Forster, C.B.
    1996. Fault zone architecture and permeability structure. Geology, 24, 1025–1028.
    [Google Scholar]
  10. Cappa, F. & Rutqvist, J.
    2011. Modeling of coupled deformation and permeability evolution during fault reactivation induced by deep underground injection of CO2 . International Journal of Greenhouse Gas Control, 5, 336–346.
    [Google Scholar]
  11. Cappa, F., Guglielmi, Y. & Virieux, J.
    2007. Stress and fluid transfer in a fault zone due to overpressures in the seismogenic crust. Geophysical Research Letters, 34, L05301.
    [Google Scholar]
  12. Chan, A.W. & Zoback, M.D.
    2007. The role of hydrocarbone production on land subsidence and fault reactivation in the Louisiana zone. Journal of Coastal Research, 23, 771–786.
    [Google Scholar]
  13. Chester, F.M., Evans, J.P. & Biegel, R.L.
    1993. Internal structure and weakening mechanisms of the San Andreas fault. Journal of Geophysical Research, 98, (B1), 771–786.
    [Google Scholar]
  14. Choi, J.H., Edwards, P., Ko, K. & Kima, Y.S.
    2016. Definition and classification of fault damage zones: A review and a new methodological approach. Earth-Science Reviews, 152, 70–87.
    [Google Scholar]
  15. Cilona, A., Baud, P., Tondi, E., Agosta, F., Vinciguerra, S., Rustichelli, A. & Spiers, C.J.
    2012. Deformation bands in porous carbonate grainstones: Field and laboratory observations. Journal of Structural Geology, 45, 137–157.
    [Google Scholar]
  16. Delle Piane, C., Arena, A., Sarout, J., Esteban, L. & Cazes, E.
    2015. Micro-crack enhanced permeability in tight rocks: An experimental and microstructural study. Tectonophysics, 665, 149–156.
    [Google Scholar]
  17. Delle Piane, C., Giwelli, A. et al.
    2016. Frictional and hydraulic behaviour of carbonate fault gouge during fault reactivation – an experimental study. Tectonophysics, http://dx.doi.org/10.1016/j.tecto.2016.07.011.
    [Google Scholar]
  18. Dusseault, M.B., Bruno, M.S. & Barrera, J.
    2001. Casing shear:causes,cases,cures. SPE Drilling & Completion, 6, 98–107.
    [Google Scholar]
  19. Ellsworth, W.L.
    2013. Injection-induced earthquakes. Science, 341, 142–149.
    [Google Scholar]
  20. Engelder, J.T.
    1974. Cataclasis and the generation of fault gouge. Geological Society of America Bulletin, 85, 1515–1522.
    [Google Scholar]
  21. Esaki, T., Nakahara, K., Jiang, Y., Kimura, T. & Mitani, Y.
    1995a. Shear-flow coupling properties of rock joints. In: The 8th International Congress on Rock Mechanics, 25–30 September, Tokyo, Japan. Taylor & Francis, 739–742.
    [Google Scholar]
  22. Esaki, T., Nakahara, K., Jiang, Y. & Mitani, Y.
    1995b. Effects of preceding shear history on shear-flow coupling properties of rock joints. In: International Symposium on Jointed and Faulted Rock, Vienna, Austria, 10–14 April 1995. A. A. Balkema, Rotterdam, 501–506
    [Google Scholar]
  23. Fardin, N.
    2008. Influence of structural non-stationarity of surface roughness on morphological characterization and mechanical deformation of rock joints. Rock Mechanics and Rock Engineering, 41, 267–297.
    [Google Scholar]
  24. Faulkner, D.R., Lewis, A.C. & Rutter, E.H.
    2003. On the internal structure and mechanics of large strike-slip faults: Field observations from the Carboneras fault, southeastern Spain. Tectonophysics, 367, 235–251.
    [Google Scholar]
  25. Faulkner, D.R., Jackson, C.A.L., Lunn, R.J., Schlische, R.W., Shipton, Z.K., Wibberley, C.A.J. & Withjack, M.O.
    2010. A review of recent developments concerning the structure, mechanics and fluid flow properties of fault zones. Journal of Structural Geology, 32, 1557–1575.
    [Google Scholar]
  26. Feignier, B. & Grasso, J.R.
    1990. Seismicity induced by gas production: I. Correlation of focal mechanisms and dome structure. Pure and Applied Geophysics, 34, 405–426.
    [Google Scholar]
  27. Fjaer, E., Holt, R.M., Horsrud, P., Raaen, A.M. & Risnes, R.
    2008. Petroleum Related Rock Mechanics. Elsevier, Amsterdam.
    [Google Scholar]
  28. Fossen, H. & Bale, A.
    2007. Deformation bands and their influence on fluid flow. American Association of Petroleum Geologists Bulletin, 91, 1685–1700.
    [Google Scholar]
  29. Giger, S.B., Clennell, M.B. et al.
    2011. Design, operation and validation of a new fluid-sealed direct shear apparatus capable of monitoring fault-related fluid flow to large displacements. International Journal of Rock Mechanics and Mining Sciences, 48, 1160–1172.
    [Google Scholar]
  30. Giger, S.B., Clennell, M.B., Ciftci, N.B., Harbers, C., Clark, P. & Ricchetti, M.
    2013. Fault transmissibility in clastic argillaceous sequences controlled by clay smear evolution. American Association of Petroleum Geologists Bulletin, 97, 705–731.
    [Google Scholar]
  31. Giwelli, A., Delle Piane, C. et al.
    2016. Laboratory observations of fault transmissibility alteration in carbonate rock during direct shearing. Geofluids, http://dx.doi.org/10.1111/gfl.12183.
    [Google Scholar]
  32. Gudmundsson, A.
    1999. Fluid overpressure and stress drop in fault zones. Geophysical Research Letters, 26, 115–118.
    [Google Scholar]
  33. 2000. Active fault zones and groundwater flow. Geophysical Research Letters, 27, 2993–2996.
    [Google Scholar]
  34. Hawkes, C.D., Meclellan, P.J. & Bachu, S.
    2005. Geomechanical factors affection geological storage of CO2 in depleted oil and gas reservoirs. Journal of Canadian Petroleum Technology, 44, 52–61.
    [Google Scholar]
  35. HounsfieldG.N.
    1973. Computerized transverse axial scanning (tomography): Part I. Description of system. British Journal of Radiology, 46, 1016–1022.
    [Google Scholar]
  36. Hull, J.
    1988. Thickness-displacement relationships for deformation zones. Journal of Structural Geology, 10, 431–435.
    [Google Scholar]
  37. Jolley, S.J., Fisher, Q.J. & Ainsworth, R.B.
    2010. Reservoir compartmentalization: an introduction. In: Jolley, S.J., Fisher, Q.J., Ainsworth, R.B., Vrolijk, P.J. & Delisle, S. (eds) Reservoir Compartmentalization. Geological Society, London, Special Publications, 347, 1–8, http://doi.org/10.1144/SP347.1
    [Google Scholar]
  38. Logan, J.M., Dengo, C.A., Higgs, N.G. & Wang, Z.Z.
    1992. Fabrics of experimental fault zones: Their development and relationship to mechanical behavior. In: Evans, B. & Wong, T.-F. (eds) Fault Mechanics and Transport Properties of Rocks. International Geophysics Series, 51. Academic Press, London, 33–67.
    [Google Scholar]
  39. Maggi, M., Cianfarra, P., Salvini, F. & Coelho de Lima, C.
    2015. Staircase fractures in microbialites and the role of lamination-related mechanical anisotropy: The example of the Acquasanta Terme travertine deposits (central Italy). Geological Society of America Bulletin, 127, 879–896.
    [Google Scholar]
  40. Maini, Y.N.T.
    1971. In situ hydraulic parameters in jointed rock: their measurement and interpretation. PhD thesis, Imperial College, University of London.
    [Google Scholar]
  41. Makurat, A., Neuman, S.P. & Simpson, E.S.
    1985. The effect of shear displacement on the permeability of natural rough joints. In: Proceedings of the 17th International Congress; Hydrogeology of Rocks of Low Permeability, Tucson, Arizona, 7–12 January 1985, 99–106.
    [Google Scholar]
  42. Makurat, A., Barton, N., Rad, N.S. & Bandis, S.
    1990. Joint conductivity variation due to normal and shear deformation. In: Proceedings of the International Symposium on Rock Joints, 4–6 June 1990. A. A. Balkema, 535–540.
    [Google Scholar]
  43. Matsuki, K., Kimura, Y., Sakaguchi, K., Kizaki, A. & Giwelli, A.A.
    2010. Effect of shear displacement on the hydraulic conductivity of a fracture. International Journal of Rock Mechanics and Mining Sciences, 47, 436–449.
    [Google Scholar]
  44. Michie, E.A.H., Haines, T.J., Healy, D., Neilson, J.E., Timms, N.E. & Wibberley, C.A.J.
    2014. Influence of carbonate facies on fault zone architecture. Journal of Structural Geology, 65, 82–99.
    [Google Scholar]
  45. Mitchell, T.M. & Faulkner, D.R.
    2009. The nature and origin of off-fault damage surrounding strike-slip fault zones with a wide range of displacements: A field study from the Atacama fault system, northern Chile. Journal of Structural Geology, 31, 802–816.
    [Google Scholar]
  46. Morrow, C.A., Shi, L.Q. & Byerlee, J.D.
    1984. Permeability of fault gouge under confining pressure and shear stress. Journal of Geophysical Research, 89, (B5), 3193–3200.
    [Google Scholar]
  47. Nacht, P.K., de Oliveira, M.F.F., Roehl, D.M. & Costa, A.M.
    2010. Investigation of geological fault reactivation and opening. In: Dvorkin, E., Goldschmit, M. & Storti, M. (eds) Mecánica Computacional, Buenos Aires, Argentina, 15–18 November 2010, 8687–8697.
    [Google Scholar]
  48. Olsson, W.A. & Brown, S.R.
    1993. Hydromechanical response of a fracture undergoing compression and shear. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 30, 845–851.
    [Google Scholar]
  49. Petunin, V.V., Tutuncu, A.N., Prasad, M., Kazemi, H. & Yin, X.
    2011. An experimental study for investigating the stress dependence of permeability in sandstones and carbonates. Paper ARMA 11–279 presented at the45th US Rock Mechanics/Geomechanics Symposium, San Francisco, CA, June, 26–29.
    [Google Scholar]
  50. Rath, A., Exner, E., Tschegg, C., Grasemann, B., Laner, L. & Draganits, E.
    2011. Diagenetic control of deformation mechanisms in deformation bands in a carbonate grainstone. American Association of Petroleum Geologists Bulletin, 95, 1369–1381.
    [Google Scholar]
  51. Rinaldi, A.P., Rutqvist, J. & Cappa, F.
    2014. Geomechanical effects on CO2 leakage through fault zones during large-scale underground injection. International Journal of Greenhouse Gas Control, 20, 117–131.
    [Google Scholar]
  52. Robertson, E.C.
    1982. Continuous formation of gouge and breccia during fault displacement. ARMA 82–397. In: Goodman, R. E. & Hulse, F. (eds) Proceedings of the 23rd US Symposium of Rock Mechanics, 25–27 August 1982, Berkeley, California, USA. American Institute of Mining and Engineering, New York, 397–404.
    [Google Scholar]
  53. Ronchi, P. & Cruciani, F.
    2015. Continental carbonates as a hydrocarbon reservoir, an analog case study from the travertine of Saturnia, Italy. American Association of Petroleum Geologists Bulletin, 99, 711–734.
    [Google Scholar]
  54. Sanz, P.F., Lele, S.P. et al.
    2015. Geomechanical analysis to evaluate production-induced fault reactivation at Groningen gas field. Paper SPE-174942 presented at the SPE Annual Technical Conference and Exhibition, Houston, Texas, USA, 28–30 September 2015.
    [Google Scholar]
  55. Schmitt, M., Halisch, M., Müller, C. & Fernandes, C.P.
    2015. Classification and quantification of pore shapes in sandstone reservoir rocks with 3-D X-ray micro-computed tomography. Solid Earth Discussions, 7, 3441–3479.
    [Google Scholar]
  56. Schneider, C.A., Rasband, W.S. & Eliceiri, K.W.
    2012. NIH Image to ImageJ: 25 years of image analysis. Nature Methods, 9, 671–675.
    [Google Scholar]
  57. Scholz, C.H.
    1987. Wear and gouge formation in brittle faulting. Geology, 15, 493–495.
    [Google Scholar]
  58. Segall, P.
    1992. Induced stresses due to fluid extraction from axisymmetric reservoirs. Pure and Applied Geophysics, 139, 535–560.
    [Google Scholar]
  59. Serra De Souza, A.L., Braz De Souza, J.N., Meurer, G.B., Naveira, V.P., Chaves, R.A.P., Frydman, M. & Pastor, J.
    2014. Integrated 3D geomechanics and reservoir simulation optimize performance, avoid fault reactivation. World Oil, April issue, 55–58.
    [Google Scholar]
  60. Sibson, R.H.
    1977. Fault rocks and fault mechanisms. Journal of the Geological Society, London, 133, 191–213, http://doi.org/10.1144/gsjgs.133.3.0191
    [Google Scholar]
  61. Soete, J., Kleipool, L.M. et al.
    2015. Acoustic properties in travertines and their relation to porosity and pore types. Marine and Petroleum Geology, 59, 320–335.
    [Google Scholar]
  62. Vermilye, J.M. & Scholz, C.H.
    1998. The process zone: a microstructural view of fault growth. Journal of Geophysical Research, 103, (B6), 12223–12237.
    [Google Scholar]
  63. Wellington, S.L. & Vinegar, H.J.
    1987. X-ray computerized tomography. Journal of Petroleum Technology, 39, 885–898.
    [Google Scholar]
  64. Wibberley, C.A.J. & Shimamoto, T.
    2003. Internal structure and permeability of amajor strick-slip fault zones: The Median Tectonic Line in Mie Prefecture, Southwest Japan. Journal of Structural Geology, 25, 59–78.
    [Google Scholar]
  65. Wiprut, D. & Zoback, M.D.
    2000. Fault reactivation and fluid flow along a previously dormant normal fault in the northern North Sea. Geology, 28, 595–598.
    [Google Scholar]
  66. Yeo, I.W., Freitas, D.M.H. & Zimmerman, R.W.
    1998. Effect of shear displacement on the aperture and permeability of a rock fracture. International Journal of Rock Mechanics and Mining Sciences, 35, 1051–1070.
    [Google Scholar]
  67. Zhang, Y., Gartrell, A., Underschultz, J.R. & Dewhurst, D.N.
    2009. Numerical modelling of strain localisation and fluid flow during extensional fault reactivation: Implications for hydrocarbon preservation. Journal of Structural Geology, 31, 315–327.
    [Google Scholar]
  68. Zoback, M.D., Chan, A.W. & Zinke, J.C.
    2001. Production-induced normal faulting. In: Elsworth, D., Tinucci, J.P. & Heasley, K.A. (eds) Rock Mechanics in the National Interest, Proceedings of the 38th US Rock Mechanics Symposium, 7–10 July, Washington, DC, Volumes 1 and 2. A.A. Balkema, Rotterdam, 157–163.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/journals/10.1144/petgeo2016-025
Loading
/content/journals/10.1144/petgeo2016-025
Loading

Data & Media loading...

  • Article Type: Research Article

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error