1887

Abstract

Summary

Accuracy of well performance data increases the chance of success in field management. Similarity water-cut monitoring helps to control the well during drilling and production stages. In this paper it was tried to design an experimental setup and particular tests. Then based on the gathered data, the effect of flow water-cut changes in the test pipe on flow electrical resistivity value between two electrodes which are placed in the pipe is investigated. The higher water cut was, the less flow resistivity measured. Rate of mixture resistivity decreasing is higher in lower water cut (between 8 to 50%). Also two matched equations are gained to predict the water cut for known flow electrical resistivity in two different range of water cut.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.201801747
2018-06-11
2024-03-28
Loading full text...

Full text loading...

References

  1. Black, M., & Noui-Mehidi, M.
    [2014]. High Salinity Permittivity Models To Aid Water Cut Meter Design. 9th North American Conference on Multiphase Technology. Banff, Canada.
    [Google Scholar]
  2. De Lima Ávila, H. E., Pagano, D. J., De Sousa, F. R
    &. [2015] Improving the performance of an RF resonant cavity water-cut meter using an impedance matching network. Flow Measurement and Instrumentation, 43, 14–22.
    [Google Scholar]
  3. Lei, L., Xingbin, L., Jinhai, H., & Yanjun, W.
    [2007]. Experimental research for response model of the impedance water cut meter. Petroleum Instruments, 3019.
    [Google Scholar]
  4. ZHANG, B., & LIU, R.-h.
    [2009]. Design of Water-cut Meter for Crude Oil based on Capacitance conductance Technique. Instrument Technique and Sensor, 7, 014.
    [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.201801747
Loading
/content/papers/10.3997/2214-4609.201801747
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error