1887
  1. Home
  2. A-Z Publications
  3. Basin Research
  4. Volume 31, Issue 1
  5. Article
Volume 31, Issue 1
  • E-ISSN: 1365-2117

Abstract

Abstract

Gilbert deltas are now recognised as an important stratigraphic component of many extensional basins. They are remarkable due to their coarse‐grained nature, large size and steep foresets (up to 30–35°) and may exhibit a variety of slope instability features (faulting, slump scars, avalanching, etc.). They are also often closely related to major, basin‐margin normal faults. There has been considerable research interest in Gilbert deltas, partly due to their economic significance as stratigraphic traps for hydrocarbons but also due to their sensitivity to relative base level changes, giving them an important role in basin analysis. In addition to field studies, numerical modelling has also been used to simulate such deltas, with some success. However, until now, such studies have typically employed continuum numerical techniques where the basic data elements created by simulations are stratigraphic volumes or timelines and the sediments themselves have no internal properties and merely represent areas/volumes of introduced coarse‐grained, clastic and sedimentary material. Faulting or folding (if present) are imposed externally and do not develop (naturally) within the modelled delta body itself. Here, I present first results from a novel 2D numerical model which simulates coarse‐grained (Gilbert‐type) deltaic sedimentation in an active extensional tectonic setting undergoing a relative base level rise. Sediment is introduced as packages of discrete elements which are deposited beneath sea level, from the shoreline, upon a pre‐existing basin or delta. These elements are placed carefully and then allowed to settle onto the system. The elements representing the coarse‐grained, deltaic sediments can have an intrinsic coefficient of friction, cohesion or other material properties appropriate to the system being considered. The spatial resolution of the modelling is of the order of 15 m and topsets, foresets, bottomsets, faults, slumps and collapse structures all form naturally in the modelled system. Examples of deltas developing as a result of sediment supply from both the footwall and hanging‐wall of a normal fault, and subject to changes in fault slip rate are presented. Implications of the modelling approach, and its application and utility in basin research, are discussed.

Basin Research © 2019 John Wiley & Sons Ltd, European Association of Geoscientists & Engineers and International Association of Sedimentologists © 2018 The Authors. Basin Research © 2018 John Wiley & Sons Ltd, European Association of Geoscientists & Engineers and International Association of Sedimentologists
Loading

Article metrics loading...

/content/journals/10.1111/bre.12309
2018-08-13
2024-04-19

  • From This Site

    /content/journals/10.1111/bre.12309
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. Abe, S., van Gent, H., & Urai, J. L. (2011). DEM simulation of normal faults in cohesive materials. Tectonophysics, 512, 12–21. https://doi.org/10.1016/j.tecto.2011.09.008
     [Google Scholar]
  2. Allen, M. P., & Tildesley, D. J. (1987). Computer simulation of liquids. Oxford, UK: Oxford Science Publications.
     [Google Scholar]
  3. Backert, N., Ford, M., & Malartre, F. (2010). Architecture and sedimentology of the Kerinitis Gilbert‐type fan delta, Corinth Rift, Greece. Sedimentology, 57, 543–586. https://doi.org/10.1111/j.1365-3091.2009.01105.x
     [Google Scholar]
  4. Botter, C., Cardozo, N., Hardy, S., Lecomte, I., & Escalona, A. (2014). From mechanical modeling to seismic imaging of faults: A synthetic workflow to study the impact of faults on seismic. Marine and Petroleum Geology, 57, 187–207. https://doi.org/10.1016/j.marpetgeo.2014.05.013
     [Google Scholar]
  5. Botter, C., Cardozo, N., Hardy, S., Lecomte, I., Paton, G., & Escalona, A. (2016). Seismic characterisation of fault damage in 3D using mechanical and seismic modelling. Marine and Petroleum Geology, 77, 973–990. https://doi.org/10.1016/j.marpetgeo.2016.08.002
     [Google Scholar]
  6. Cardozo, N., & Allmendinger, R. W. (2009). SSPX: A program to compute strain from displacement/velocity data. Computers & Geosciences, 35, 1343–1357. https://doi.org/10.1016/j.cageo.2008.05.008
     [Google Scholar]
  7. Chapman, B., Jost, G., & van der Pas, R. (2007). Using OpenMP: Portable shared memory parallel programming. Cambridge, MA: The MIT Press.
     [Google Scholar]
  8. Colella, A. (1988a). Fault‐controlled marine Gilbert‐type fan deltas. Geology, 16, 1031–1034. https://doi.org/10.1130/0091-7613(1988)016<1031:FCMGTF>2.3.CO;2
     [Google Scholar]
  9. Colella, A. (1988b). Pliocene‐Holocene fan deltas and braid deltas in the Crati Basin, southern Italy: A consequence of varying tectonic. In W.Nemec , & R. J.Steel (Eds.), Fan deltas: Sedimentology and tectonic settings (pp. 50–74). Blackie and Son: Glasgow and London.
     [Google Scholar]
  10. Cundall, P. A., & Strack, O. D. L. (1979). A discrete numerical model for granular assemblies. Geotechnique, 29, 47–65. https://doi.org/10.1680/geot.1979.29.1.47
     [Google Scholar]
  11. Dart, C. J., Collier, R. E. L., Gawthorpe, R. L., Keller, J. V. A., & Nichols, G. (1994). Sequence stratigraphic of (?)Pliocene‐ Quaternary synrift, Gilbert‐type fan deltas, northern Peloponnesos, Greece. Marine and Petroleum Geology, 11, 545–560. https://doi.org/10.1016/0264-8172(94)90067-1
     [Google Scholar]
  12. Egholm, D. L., Sandiford, M., Clausen, O. R., & Nielsen, S. B. (2007). A new strategy for discrete element numerical models: 2. Sandbox applications. Journal of Geophysical Research, 112, B05204. https://doi.org/10.1029/2006JB004558
     [Google Scholar]
  13. Fernandez, J., & Guerra‐Merchan, A. (1996). A coarsening upward megasequence generated by a Gilbert‐type fan‐delta in a tectonically controlled context (Upper Miocene, Gua‐ dix‐Baza Basin, Betic Cordillera, southern Spain). Sedimentary Geology, 105, 191–202. https://doi.org/10.1016/0037-0738(95)00137-9
     [Google Scholar]
  14. Finch, E., Hardy, S., & Gawthorpe, R. L. (2004). Discrete element modelling of extensional fault‐propagation folding above rigid basement fault blocks. Basin Research, 16, 489–506.
     [Google Scholar]
  15. Ford, M., Williams, E. A., Malartre, F., & Popescu, S. M. (2007) Stratigraphic architecture, sedimentology and structure of the Vouraikos Gilbert‐type fan delta, Gulf of Corinth, Greece. In G.Nichols , E.Williams & C.Paola (Eds.), Sedimentary processes, environments and basins: A tribute to Peter Friend (vol. 38, pp. 49–90). International Association of Sedimentologists Special Publication. Malden, MA: Blackwell Publication. https://doi.org/10.1002/9781444304411
     [Google Scholar]
  16. Garcia‐Garcia, F., Fernandez, J., Viseras, C., & Soria, J. H. (2006). Architecture and sedimentary facies evolution in a delta stack controlled by fault growth (Betic Cordillera, southern Spain, late Tortorian). Sedimentary Geology, 185, 79–92. https://doi.org/10.1016/j.sedgeo.2005.10.010
     [Google Scholar]
  17. van Gent, H. W., Holland, M., Urai, J. L., & Loosveld, R. (2010). Evolution of fault zones in carbonates with mechanical stratigraphy ‐ Insights from scale models using layered cohesive powder. Journal of Structural Geology, 32, 1375–1391. https://doi.org/10.1016/j.jsg.2009.05.006
     [Google Scholar]
  18. Gilbert, G. K. (1885). The topographic features of lake shores. US Geological Survey Annual Report, 5, 69–123.
  19. Gilbert, G. K. (1890). Lake Bonneville. US Geological Survey Monograph, 1, 1–438.
  20. Gratacos, O., Bitzer, K., Cabrera, L., & Roca, E. (2009). SIMSAFADIM‐CLASTIC: A new approach to mathematical 3D forward simulation modelling for terrigenous and carbonate marine sedimentation. Geologica Acta, 7, 311–322.
     [Google Scholar]
  21. Hardy, S. (1994). Mathematical modelling of sedimentation in active tectonic settings. PhD Thesis, Royal Holloway University of London.
  22. Hardy, S. (2008). Structural evolution of calderas: Insights from two‐dimensional discrete element simulations. Geology, 36, 927–930. https://doi.org/10.1130/G25133A.1
     [Google Scholar]
  23. Hardy, S. (2011). Cover deformation above steep, basement normal faults: Insights from 2D discrete element modeling. Marine and Petroleum Geology, 28, 966–972. https://doi.org/10.1016/j.marpetgeo.2010.11.005
     [Google Scholar]
  24. Hardy, S. (2015). The Devil truly is in the detail. A cautionary note on computational determinism: Implications for structural geology numerical codes and interpretation of their results. Interpretation, 3(4), SAA29–SAA35. https://doi.org/10.1190/INT-2015-0052.1
     [Google Scholar]
  25. Hardy, S. (2016). Does shallow dike intrusion and widening remain a possible mechanism for graben formation on Mars?Geology, 44, 107–110. https://doi.org/10.1130/G37285.1
     [Google Scholar]
  26. Hardy, S. (2018). Coupling a frictional‐cohesive cover and a viscous substrate in a discrete element model: First results of application to thick‐ and thin‐skinned extensional tectonics. Marine and Petroleum Geology, 97, 32–44. https://doi.org/10.1016/j.marpetgeo.2018.06.026
     [Google Scholar]
  27. Hardy, S., Dart, C. J., & Waltham, D. (1994). Computer modelling of the influence of tectonics on sequence architecture of coarse‐grained fan deltas. Marine and Petroleum Geology, 11, 561–574. https://doi.org/10.1016/0264-8172(94)90068-X
     [Google Scholar]
  28. Hardy, S., & Gawthorpe, R. L. (1998). Effects of variations in fault slip rate on sequence stratigraphy in fan deltas: Insights from numerical modeling. Geology, 26, 911–914. https://doi.org/10.1130/0091-7613(1998)026<0911:EOVIFS>2.3.CO;2
     [Google Scholar]
  29. Hardy, S., & Gawthorpe, R. L. (2002). Normal fault control on bedrock channel incision and sediment supply: Insights from numerical modeling. Journal of Geophysical Research, 107, 2246. https://doi.org/10.1029/2001JB000166
     [Google Scholar]
  30. Hardy, S., McClay, K., & Muñoz, J. A. (2009). Deformation and fault activity in space and time in high‐resolution numerical models of doubly vergent thrust wedges. Marine and Petroleum Geology, 26, 232–248. https://doi.org/10.1016/j.marpetgeo.2007.12.003
     [Google Scholar]
  31. Holohan, E. P., Schopfer, M. P. J., & Walsh, J. J. (2011). Mechanical and geometric controls on the structural evolution of pit crater and caldera subsidence. Journal of Geophysical Research, 116, B07202. https://doi.org/1029/2010JB008032
     [Google Scholar]
  32. Malartre, F., Ford, M., & Williams, E. A. (2004). Preliminary biostratigraphy and 3D geometry of the Vouraikos Gilbert‐type fan delta, Gulf of Corinth, Greece. CR Académie des Sciences, Paris, 336, 269–280.
     [Google Scholar]
  33. Mora, P., & Place, D. (1993). A lattice solid model for the non‐linear dynamics of earthquakes. International Journal of Modern Physics C, 4, 1059–1074. https://doi.org/10.1142/S0129183193000823
     [Google Scholar]
  34. Mora, P., & Place, D. (1994). Simulation of the frictional stick‐slip instability. Pure and Applied Geophysics, 143, 61–87. https://doi.org/10.1007/BF00874324
     [Google Scholar]
  35. Oger, L., Savage, S. B., Corriveau, D., & Sayed, M. (1998). Yield and deformation of an assembly of disks subject to a deviatoric stress loading. Mechanics of Materials, 27, 189–210. https://doi.org/10.1016/S0167-6636(97)00066-5
     [Google Scholar]
  36. Place, D., Lombard, F., Mora, P., & Abe, S. (2002). Simulation of the micro‐physics of rocks using LSMEarth. Pure and Applied Geophysics, 159, 1911–1932. https://doi.org/10.1007/s00024-002-8715-x
     [Google Scholar]
  37. Ritchie, B. D., Gawthorpe, R. L., & Hardy, S. (2004a). Three‐dimensional numerical modeling of deltaic depositional sequence 1: Influence of the rate and magnitude of sea‐level change. Journal of Sedimentary Research, 74, 203–220. https://doi.org/10.1306/091303740203
     [Google Scholar]
  38. Ritchie, B. D., Gawthorpe, R. L., & Hardy, S. (2004b). Three‐dimensional numerical modeling of deltaic depositional sequences 2: Influence of local controls. Journal of Sedimentary Research, 74, 221–238. https://doi.org/10.1306/091303740221
     [Google Scholar]
  39. Ritchie, B. D., Hardy, S., & Gawthorpe, R. L. (1999). Three‐dimensional numerical modeling of coarse‐grained clastic deposition in sedimentary basins. Journal of Geophysical Research, 104, 17759–17780. https://doi.org/10.1029/1999JB900170
     [Google Scholar]
  40. Schultz, R. A. (1996). Relative scale and the strength and deformability of rock masses. Journal of Structural Geology, 18, 1139–1149. https://doi.org/10.1016/0191-8141(96)00045-4
     [Google Scholar]
  41. Strayer, L. M., Erickson, S. G., & Suppe, J. (2004). Influence of growth strata on the evolution of fault‐related folds: Distinct‐element models. In M. & K. (Ed.), Thrust Tectonics and Hydrocarbon Systems. Tulsa, OK: American Association of Petroleum Geologists Memoir 82 (pp. 413–437).
     [Google Scholar]
  42. Thompson, N., Bennett, M. R., & Petford, N. (2010). Development of characteristic volcanic debris avalanche deposit structures: New insights from distinct element simulations. Journal of Volcanology and Geothermal Research, 192, 191–200.
     [Google Scholar]
http://instance.metastore.ingenta.com/content/journals/10.1111/bre.12309
Loading
Novel discrete element modelling of Gilbert‐type delta formation in an active tectonic setting—first results
Basin Research 31, 77 (2019); https://doi.org/10.1111/bre.12309
/content/journals/10.1111/bre.12309
/content/journals/10.1111/bre.12309
Loading

Data & Media loading...

  • Article Type: Research Article

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error