1887

Abstract

Summary

Synergy between EOR processes has the potential for achieving more effective application. Previously, we demonstrated Smart water's slight negative-impact on polymer and chase brine injectivity, positive impact on polymer retention, and negligible impact on polymer acceleration. We also demonstrated polymer's positive effects on Smart water's surface potentials, contact angles, and oil recoveries. Herein, we further investigate this synergy focusing on polymer's possible effects on SmartWater spontaneous imbibition. We also revisit singlephase displacement observations with regard to polymer injectivity and retention using bench-top experiments. The main experimental program consisted of spontaneous-imbibition and sorption measurements. A supplementary experimental program included polymer filterability and adsorption tests to provide additional insights on this synergistic SmartWater/Polymer process.

Results showed the superiority of SmartWater as an imbibition fluid compared to the higher-salinity injection water. With polymer addition, the lower-salinity SmartWater upheld its superiority. Accounting for viscosity variations, sorption rates into powdered rock packs were actually very comparable with and without the polymer. In core plugs, and with both brines, polymer addition yielded further water imbibition above that obtained with polymer-free solutions. Still imbibition was much more effective with SmartWater even in the presence of the polymer. At the same polymer concentrations, polymer adsorptions onto the rock were comparable with both SmartWater and the higher-salinity injection water. However, at equivalent viscosities, polymer adsorption onto the rock was lower with SmartWater than with the higher-salinity injection water. These static adsorption results could provide an additional explanation to the substantially lower retention observed with the lower-salinity SmartWater in dynamic retention tests. At the same polymer concentration, the solutions in both brines exhibited comparable filtration ratios. However, for solutions of equivalent viscosities, the solution in the higher-salinity conventional injection water exhibited higher filtration ratio. This discrepancy with single-phase displacement results can be explained based on differences of the main mechanism contributing to permeability reduction (adsorption layer versus mechanical plugging).

In conclusion, the favorable SmartWater/Polymer synergy extends to spontaneous imbibition. Polymer solutions, in both SmartWater and injection water yielded additional imbibition in tertiary mode. However, with injection water the additional imbibition after polymer addition is much smaller than with SmartWater.

Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.201900141
2019-04-08
2024-03-29
Loading full text...

Full text loading...

References

  1. Aladasani, A., Bai, B., Wu, Y.-S. and Okasha, Q.
    , 2015. 3D Simulation of Low Salinity, Polymer, Conventional, Water-flooding & Combination IOR Methods–Heterogeneous & Varying Wetting Conditions. SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition. doi: 10.2118/176315‑MS
    https://doi.org/10.2118/176315-MS [Google Scholar]
  2. AlSofi, A.M., Wang, J. AlBoqmi, A. M. AlOtaibi, M. B., AyiralaS., and AlYousefA. A.
    , 2018a. SmartWater synergy with Chemical Enhanced Oil Recovery: Polymer Effects on Smartwater. SPE Reservoir Evaluation & Engieering doi: 10.2118/184163‑PA
    https://doi.org/10.2118/184163-PA [Google Scholar]
  3. AlSofi, A.M., Wang, J. and Kaidar, Z.F.
    , 2018b. SmartWater synergy with chemical EOR: Effects on polymer injectivity, retention and acceleration. Journal of Petroleum Science and Engineering, 166, pp.274–282. doi: 10.1016/j.petrol.2018.02.036
    https://doi.org/10.1016/j.petrol.2018.02.036 [Google Scholar]
  4. Chang, H.L.
    1978. Polymer Flooding Technology-Yesterday, Today and Tomorrow. Journal of Petroleum Technology, 1113–1128. doi: 10.2118/7043‑PA
    https://doi.org/10.2118/7043-PA [Google Scholar]
  5. Chang, H.L., Zhang, Z.Q., Wang, Q.M., Xu, Z.S., Guo, Z.D., Sun, H.Q., Cao, X.L. and Qiao, Q.
    2006. Advances in Polymer Flooding and Alkaline/Surfactant/Polymer Processes as Developed and Applied in the People's Republic of China. Journal of Petroleum Technology, 84–89. doi: 10.2118/89175‑JPT
    https://doi.org/10.2118/89175-JPT [Google Scholar]
  6. Fuseni, A., Han, M. and Al-Mobith, A.
    , 2013. Phase Behavior and Interfacial Tension Properties of an Amphoteric Surfactant for EOR Application. SPE Saudi Arabia Section Technical Symposium and Exhibition. doi: 10.2118/168104‑MS
    https://doi.org/10.2118/168104-MS
  7. Fuseni, A.B., Al-Zahrani, B.H., Al-Shehri, A.J. and AlSofi, A.M.
    , 2018, December. Evaluation of Surfactants Wettability Alteration Using the Washburn Contact Angle Method. In SPE International Heavy Oil Conference and Exhibition. Society of Petroleum Engineers. doi: 10.2118/193751‑MS
    https://doi.org/10.2118/193751-MS [Google Scholar]
  8. Han, M., Zhou, X., Fuseni, A.B., Al-Zahrani, B.H. and AlSofi, A.M.
    , 2012. Laboratory Investigation of the Injectivity of Sulfonated Polyacrylamide Solutions into Carbonate Reservoir Rocks. SPE EOR Conference at Oil and Gas West Asia. doi: 10.2118/155390‑MS
    https://doi.org/10.2118/155390-MS
  9. Han, M., AlSofi, A.M., Fuseni, A., Zhou, X. and Hassan, S.
    , 2013. Development of Chemical EOR Formulations for a High Temperature and High Salinity Carbonate Reservoir. International Petroleum Technology Conference. doi: 10.2523/17084‑MS
    https://doi.org/10.2523/17084-MS
  10. Han, M., Fuseni, A., Zahrani, B. and Wang, J.
    , 2014. Laboratory Study on Polymers for Chemical Flooding in Carbonate Reservoirs. SPE EOR Conference at Oil and Gas West Asia. doi: 10.2118/169724‑MS
    https://doi.org/10.2118/169724-MS
  11. Jennings, R.R., Rogers, J.H., and West, T.J.
    1971. Factors Influencing Mobility Control by Polymer Solutions. Journal of Petroleum Technology23(3): 391–410. doi: 10.2118/2867‑PA
    https://doi.org/10.2118/2867-PA [Google Scholar]
  12. Jewett, R.L. and Schurz, G.F.
    1970. Polymer Flooding-A Current Appraisal. Journal of Petroleum Technology(June 1970)675–684. doi: 10.2118/2545‑PA
    https://doi.org/10.2118/2545-PA [Google Scholar]
  13. Khorsandi, S., Qiao, C. and Johns, R.T.
    , 2016. Displacement Efficiency for Low Salinity Polymer Flooding Including Wettability Alteration. SPE Improved Oil Recovery Conference. doi: 10.2118/165287‑MS
    https://doi.org/10.2118/165287-MS
  14. Lake, L.W.
    , 1989. Enhanced Oil Recovery. Prentice Hall. doi: ISBN: 01328160169780132816014
    https://doi.org/0132816016 9780132816014
  15. Mohammadi, H. and Jerauld, G.
    , 2012. Mechanistic modeling of the benefit of combining polymer with low salinity water for enhanced oil recovery. SPE Improved Oil Recovery Symposium. doi: 10.2118/179695‑MS
    https://doi.org/10.2118/179695-MS
  16. Needham, R.B. and Doe, P.H.
    1987. Polymer Flooding Review. Journal of Petroleum Technology(Dec. 1987)1503–1507. doi: 10.2118/17140‑PA
    https://doi.org/10.2118/17140-PA [Google Scholar]
  17. Pye, D.J.
    , 1964, Improved Secondary Recovery by Control of Water Mobility, Journal of Petroleum Technology16(8): 911–916. doi: 10.2118/845‑PA
    https://doi.org/10.2118/845-PA [Google Scholar]
  18. Sheng, J.J., Leonhardt, B. and Azri, N.
    2015. Status of Polymer Flooding Technology. Journal of Canadian Petroleum Technology(Mar. 2015)116–126. doi: 10.2118/174541‑PA
    https://doi.org/10.2118/174541-PA [Google Scholar]
  19. Sorbie, K.S.
    , 1991. Polymer-Improved Oil Recovery. Blackie. ISBN 978-94-011-3044-8
    [Google Scholar]
  20. Unsal, E., Ten Berge, A. B. G. M., Wever, D. A. Z.
    2018. Low Salinity Polymer Flooding: Lower Polymer Retention and Improved Injectivity. Journal of Petroleum Science and Engineering, 163, pp.671–682. doi: 10.1016/j.petrol.2017.10.069
    https://doi.org/10.1016/j.petrol.2017.10.069 [Google Scholar]
  21. Wang, D., Chen, J., Wu, J. et al.
    2002, Producing by Polymer Flooding More Than 300 Million Barrels of Oil, What Experiences Have Been Learnt? Paper SPE 77872 presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition, Melbourne, Australia, 8–10 October. doi: 10.2118/77872‑MS
    https://doi.org/10.2118/77872-MS
  22. Wang, J., Han, M., Fuseni, A.B. and Cao, D.
    , 2015. Surfactant Adsorption in Surfactant-Polymer Flooding for Carbonate Reservoirs. SPE Middle East Oil & Gas Show and Conference. doi: 10.2118/172700‑MS
    https://doi.org/10.2118/172700-MS [Google Scholar]
  23. Zhou, X., Han, M.
    , Fuseni, A.B. and Yousef, A.A., 2012. Adsorption of an Amphoteric Surfactant onto Permeable Carbonate Rocks. SPE Improved Oil Recovery Symposium. doi: 10.2118/153988‑MS
    https://doi.org/10.2118/153988-MS [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.201900141
Loading
/content/papers/10.3997/2214-4609.201900141
Loading

Data & Media loading...

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error