1887
  1. Home
  2. Conferences
  3. Conference Proceedings
  4. EAGE-GSM 2nd Asia Pacific Meeting on Near Surface Geoscience and Engineering
  5. Conference paper

Abstract

Summary

The surface-to-borehole TEM method has shown great potential in detecting deep minerals. This configuration mostly uses rectangular loops as its source. Considering the advantages of grounded wire sources in EM exploration, which had been successfully applied in ground and marine EM methods, we propose a new surface-to-borehole TEM system that utilizes a grounded wire source with relative short offsets. The ID inversion of surface and borehole data was realized according to an OCCAM’S inversion scheme. The inversion results of synthetic data indicates that only inversion of surface or borehole data will lead to resolution loss in deep or shallow earth. However, joint inversion of both surface and borehole data is an effective way to improve the results obtained from the inversions of individual data sets.

© EAGE Publications BV
Loading

Article metrics loading...

/content/papers/10.3997/2214-4609.201900431
2019-04-24
2024-04-26

  • From This Site

    /content/papers/10.3997/2214-4609.201900431
    dcterms_title,dcterms_subject,pub_keyword
    -contentType:Journal -contentType:Contributor -contentType:Concept -contentType:Institution
    10
    5
Loading full text...

Full text loading...

References

  1. Boyd, G. W. and WilesC. J.
    , 1984, The Newmont drill-hole EMP system-examples from Australia: Geophysics, 49, no. 7, 949–956.
     [Google Scholar]
  2. Chen, W. Y., KhanM. Y., and XueG. Q.
    , 2017a, Response of surface-to-borehole SOTEM method on 2D earth: Journal of Geophysics and Engineering, 14, no. 4, 987–997.
     [Google Scholar]
  3. Chen, W., XueG., OlatayoA. L., ChenK., KhanM. Y., ChenW., ZhangL., and ChenW.
    , 2017b, A comparison of loop time-domain electromagnetic and short-offset transient electromagnetic methods for mapping water-enriched zones-A case history in Shaanxi, China: Geophysics, 82, no. 6, B201–B208.
     [Google Scholar]
  4. Constable, S. C., ParkerR. L., and ConstableC. G.
    , 1987, Occam’s inversion—A practical algorithm for generating smooth models from electromagnetic sounding data: Geophysics, 52, 289–300.
     [Google Scholar]
  5. Dyck, A. V.
    , 1991, Drill-hole Electromagnetic Methods, in NabighianM. M., ed., Electromagnetic Methods in Applied Geophysics: SEG, 881–929.
     [Google Scholar]
  6. Eaton, P. A. and HohmannG. W.
    , 1984, The influence of a conductive host on two-dimensional borehole transient electromagnetic response: Geophysics, 49, no. 7, 861–869.
     [Google Scholar]
  7. Key, K.
    , 2009, 1D inversion of multicomponent, multifrequency marine CSEM data: Methodology and synthetic studies for resolving thin resistive layers: Geophysics, 74, no. 2, F9–F20.
     [Google Scholar]
  8. Macnae, J. and StaltariG.
    , 1987, Classification of sign changes in Borehole TEM decays: Exploration Geophysics, 18, no. 3, 331–339.
     [Google Scholar]
  9. Wu. J. J., LiX., ZhiQ. Q., QiZ. P., GuoJ. L., DengX. H., ZhangJ.X, WangC., and YangY.
    , 2017, Full field apparent resistivity definition of borehole TEM with electric source: Chinese Journal of Geophysics (in Chinese), 60, no. 4, 1595–1605.
     [Google Scholar]
  10. Zhang, Z, and XiaoJ.
    , 2001, Inversion of surface and borehole data from large-loop transient electromagnetic system over a 1-D earth: Geophysics, 66, no. 4, 1090–1096.
     [Google Scholar]
http://instance.metastore.ingenta.com/content/papers/10.3997/2214-4609.201900431
Loading
1-D inversion of surface-to-borehole TEM data based on grounded wire source
Conference Proceedings 2019, 1 (2019); https://doi.org/10.3997/2214-4609.201900431
/content/papers/10.3997/2214-4609.201900431
/content/papers/10.3997/2214-4609.201900431
Loading

Data & Media loading...

Most Cited This Month Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error